Manualshelf

SNAX/APC Configuration and Management Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series
301302303304305306307308309310
SCF Command Syntax Summary for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
B-9
LISTOPENS Command
LISTOPENS Command
The LISTOPENS command displays a list of all file system OPEN calls that apply to the
SNAX/APC process.
NAMES Command
The NAMES command displays the names of all objects having the specified object
type.
NAMES CONV Command
NAMES LU Command
NAMES PROCESS Command
NAMES PTNR-LU Command
NAMES PTNR-MODE Command
NAMES SESSION Command
LISTOPENS [PROCESS $apc-process ] [ , DETAIL ]
NAMES [ CONV $apc-process.local-lu.tpn.tpi-id.conv-id ]
[, SEL [ NOT ] summary-state ]
NAMES [ LU $apc-process.local-lu ]
[, SEL [ NOT ] summary-state ]
NAMES [ PROCESS $apc-process ] [, SEL [ NOT ] summary-state ]
[, SUB ALL ]
NAMES [ PTNR-LU $apc-process.local-lu.partner-lu ]
[, SEL [ NOT ] summary-state ]
NAMES [ PTNR-MODE $apc-process.local-lu.ptnr-lu.ptnr-mode ]
[, SEL [ NOT ] summary-state ]
NAMES [ SESSION $apc-proc.local-lu.ptnr-lu.ptnr-mode.sessid ]
[, SEL [ NOT ] summary-state ]