SNAX/APC Configuration and Management Manual

SCF Command Syntax Summary for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
B-12
STATUS PTNR-LU Command
STATUS PTNR-LU Command
STATUS PTNR-MODE Command
STATUS SESSION Command
STATUS TPI Command
STATUS TPN Command
STOP Command
The STOP command shuts down the operation of the target object in an orderly manner,
and places it in the STOPPED state.
STOP LU Command
STOP PTNR-LU Command
STATUS [ PTNR-LU $apc-process.local-lu.partner-lu ]
[, DETAIL ] [, SEL [ NOT ] summary-state ]
[, SUB [ subtype ] ]
STATUS [ PTNR-MODE $apc-proc.local-lu.ptnr-lu.ptnr-mode ]
[, DETAIL ] [, SEL [ NOT ] summary-state ]
[, SUB [ subtype ] ]
STATUS [ SESSION $apc-proc.local-lu.ptnr-lu.ptnr-mode.sessid
]
[, DETAIL] [, SEL [ NOT ] summary-state ]
STATUS [ TPI $apc-process.local-lu.tpn.tpi-id ] [, DETAIL ]
[, SEL [ NOT ] summary-state ] [, SUB [ subtype ] ]
STATUS [ TPN $apc-process.local-lu.tpn ] [, DETAIL]
[, SEL [ NOT ] summary-state ] [, SUB [ subtype ] ]
STOP [ LU $apc-process.local-lu ]
[, SEL [ NOT ] summary-state ] [, SUB [ subtype ] ]
STOP [ PTNR-LU $apc-process.local-lu.partner-lu ]
[, SEL [ NOT ] summary-state ] [, SUB [ subtype ] ]