SNAX/APC Configuration and Management Manual

SCF Error Messages for SNAX/APC

SNAX/APC Configuration and Management Manual—138787

C-14

Error 00041

Probable Cause. An invalid configuration file name was specified. The configuration

file name must be local to the SNAX/APC process.

Recommended Action. Retry the command with a valid file name.

Error 00042

Probable Cause. Because the parent object is still in the STARTING state, this START

operation cannot be completed immediately. The operation will be continued

automatically after the parent object is properly started.

Recommended Action. This is an informational message. No action is required.

Error 00500

Probable Cause. A keyword parameter was specified more than once.

Recommended Action. Specify the parameter once only.

Error 00501

Probable Cause. A modifier was specified more than once.

Recommended Action. Specify the modifier once only.

Error 00502

Probable Cause. An internal error has occurred.

Recommended Action. You need to seek additional help. Follow the procedures

described at the beginning of this appendix for collecting relevant information and

contacting the appropriate support personnel.

SNAXAPC 00041 You did not specify a valid configuration file

name.

SNAXAPC 00042 The object is currently being started.

SNAXAPC 00500 Duplicate keyword.

SNAXAPC 00501 Duplicate modifier.

SNAXAPC 00502 Internal error: Case out of range.