SNAX/APC Configuration and Management Manual

SCF Error Messages for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
C-15
Error 00503
Error 00503
Probable Cause. An attribute value has been specified that is out of the allowable range.
Recommended Action. Correct the command and resend it.
Error 00504
Probable Cause. An invalid attribute value has been specified.
Recommended Action. Correct the command and resend it.
Error 00505
Probable Cause. The required keyword parameter is missing from the command line.
The value parameter is the required parameter that is missing.
Recommended Action. Correct the command and resend it.
Error 00506
Probable Cause. The value entered for this parameter is invalid.
Recommended Action. Correct the command and resend it.
Error 00507
Probable Cause. There is an invalid token code in the buffer, or there is a token and
PTNR-MODE state mismatch. The value keyword is the state or command with the
invalid token code.
Recommended Action. Correct the command and resend it.
Error 00508
Probable Cause. The value of the keyword1 parameter cannot be used in conjunction
with the keyword2 parameter.
SNAXAPC 00503 Internal error: Input out of range.
SNAXAPC 00504 Input value invalid.
SNAXAPC 00505 Required keyword parameter is missing.
SNAXAPC 00506 Invalid value for parameter.
SNAXAPC 00507 Invalid token code for keyword.
SNAXAPC 00508 keyword1 may not be used with keyword2.