SNAX/APC Configuration and Management Manual

Comparison of LU 6.2 Control Operator Verbs and
SNAX/APC
SNAX/APC Configuration and Management Manual—138787
D-2
Table D-2 lists the LU 6.2 Session Control verbs and parameters, and the equivalent
commands and attributes implemented by SCF for SNAX/APC.
Table D-3
lists the LU 6.2 Definition verbs and parameters, and the equivalent
commands and attributes implemented by SCF for SNAX/APC.
DRAIN_TARGET DRAINTARGET
FORCE FORCE
RETURN_CODE (Command Return)
Table D-2. Session Control Verbs Versus SNAX/APC SCF Commands and
Attributes
Session Control Verbs and Parameters SCF Commands and Attributes
ACTIVATE_SESSION ADD SESSION
LU_NAME (Superior partner-lu)
MODE_NAME (Superior PTNR-MODE's MODENAME)
RETURN_CODE (Command Return)
DEACTIVATE_CONVERSATION_GROUP (Not implemented)
DEACTIVATE_SESSION ABORT/STOP SESSION
SENSE_CODE (Not implemented)
SESSION_ID (session-id)
TYPE (CLEANUP or NORMAL) ABORT = CLEANUP
STOP = NORMAL
RETURN_CONTROL (Not implemented)
RETURN_CODE (Command Return)
Table D-3. Definition Verbs Versus SNAX/APC SCF Commands and
Attributes (page 1 of 5)
Definition Verbs and Parameters SCF Commands and Attributes
DEFINE_LOCAL_LU ADD LU
FULLY_QUALIFIED_LU_NAME (local-lu)
LU_SESSION_LIMIT MAXSESSION
SECURITY (Not implemented)
MAP_NAME (Not implemented)
BIND_RSP_QUEUE_CAPABILITY (Not implemented)
Table D-1. CNOS Verbs Versus SNAX/APC SCF Commands and
Attributes (page 2 of 2)
CNOS Verbs and Parameters SCF Commands and Attributes