SNAX/APC Configuration and Management Manual

Event Management
SNAX/APC Configuration and Management Manual—138787
E-4
SNAX/APC Event Summary
SNAX/APC Event Summary
SNAX/APC generates event messages for events that involve objects under its control.
Table E-2
lists a summary of SNAX/APC event messages.
-32736 BKUP-STOPPED Backup terminated normally
-32735 NO-MEM-FOR-REQ Insufficient memory for command
-32734 CANT-ALLOC-SEG Allocation failure
-32733 TOO-MANY-BKUP-ABENDS Too many backup abends
-32732 LOG-STOPPED Log process stopped
-32731 EMS-STOPPED EMS collector process stopped
-32729 NO-CHARMAP No character map indicated
-32728 BAD-CHARMAP Bad character map indicated
-32725 CANT-INIT-CHKPT Can’t initialize checkpoint process
-32724 MEM-CNGST Congestion state of memory has changed
-32723 BAD SWAPVOL Bad swap volume specified
-32722 to
-32714
EMSn-action Collector n stopped or switched
Table E-2. SNAX/APC Event Messages (page 1 of 3)
Event
Number Symbolic Name (ZAPC-EVT-) Description
1 FSM-ERR An unexpected FSM error.
2 INV-INIT An invalid SNAX/APC startup parameter.
3 INV-CONFIG An invalid configuration file.
4 Retired message
5 Retired message
6 INV-OP An operational failure has been detected.
7 Retired message
8 Retired message
9 Retired message
10 BID-REJECT A request from a remote LU for a
conversation with a local LU was rejected.
Table E-1. Common Event Messages (page 2 of 2)
Event
Number Symbolic Name (ZCMK-EVT-) Description