SNAX/APC Configuration and Management Manual

Event Management
SNAX/APC Configuration and Management Manual—138787
E-5
SNAX/APC Event Summary
11 BKUP-TAKEOVER The process was taken over by the backup
CPU.
12 DEALLOCATE-ERR Deallocation of an extended data segment
used for tracing failed.
13 INIT-INFO Indicates initialization information.
14 LU-DEVINFO-ERR A device type inquiry for an LU has failed.
15 LU-CONNECT-ERR A connect for an LU has failed.
16 LU-OPEN-ERR SNAX/APC was unable to open a SNAX/XF
or SNAX/CDF LU.
17 INV-DEV-TYPE The device type of the LU is invalid.
18 Retired message
19 Retired message
20 SNAX-FILE-ERR A file-system error was received from
SNAX/XF or SNAX/CDF.
21 TPREADY-REJECT A TP-READY request was not completed.
22 UNXP-PAC-RQ An unexpected pacing request.
23 UNKNOWN-IPC SNAX/APC received an unknown IPC
message for processing.
24 RCVD-RMT-CNOS-CMD A remote CNOS command has been
received.
25 CNOS-CONV-FAIL The CNOS conversation has failed.
26 CNOS-CMD-RACE A CNOS command race has been detected.
27 SESS-LIMIT-CHANGED The session limits of the PTNR-MODE
object were changed by either the local or
remote LU.
28 CNOS-CMD-NEGOTIATED The remote CNOS command is in effect, but
the session limits have been negotiated.
29 CNOS-CMD-REJECTED The remote CNOS command has been
rejected.
30 NEG-RSP-RCVD A negative response was received on an SNA
session.
31 NEG-RSP-SENT A negative response has been sent on an SNA
session.
32 RCVD-RU-XCEED-MAXSIZE SNAX/APC has received an RU that exceeds
the maximum RU size.
33 SWITCHING-DB The configuration file is currently being
switched.
Table E-2. SNAX/APC Event Messages (page 2 of 3)
Event
Number Symbolic Name (ZAPC-EVT-) Description