SNAX/APC Configuration and Management Manual

Event Management
SNAX/APC Configuration and Management Manual—138787
E-6
SNAX/APC Event Summary
The SNAX/APC events listed in Table E-2 can also be divided into categories according
to the type of event. The following lists the SNAX/APC events according to these
categories.
Configuration/Startup Error Events
ZAPC-EVT-INV-CONFIG
ZAPC-EVT-INV-INIT
ZAPC-EVT-NO-CFG-FILE
Configuration/Startup Information Events
ZAPC-EVT-SEC-SERVER-STARTED
ZAPC-EVT-SWITCHING-CFG-DB-CONVERTED
ZAPC-EVT-SWITCHING-DB
ZAPC-EVT-SWITCHING-DB-DONE
ZAPC-EVT-SWITCHING-DB-FAILED
APC FSM Error Events
ZAPC-EVT-FSM-ERR
Operation Error Events
ZAPC-EVT-DEALLOCATE-ERR
ZAPC-EVT-INV-DEV-TYPE
34 SWITCHING-DB-DONE The configuration file switching is complete.
35 NO-CFG-FILE The configuration file was not useable or in
the switching process when backup takeover
occurred
36 SWITCHING-DB-FAILED The switch to a new configuration file failed.
37 CFG-DB-CONVERTED Configuration file has been converted to the
current level.
38 INVALID-LOGON
SNAX/APC received an attach that
contained either an invalid user ID and
password pair or an unknown user ID
with the already-verified indicator.
39 SEC-SERVER-STARTED
SNAX/APC started the security server.
40 SEC-SERVER-ERR
SNAX/APC attempted to access the
security server and failed because of the
error specified by ZAPC-TKN-FILE-
ERR.
Table E-2. SNAX/APC Event Messages (page 3 of 3)
Event
Number Symbolic Name (ZAPC-EVT-) Description