SNAX/APC Configuration and Management Manual

Event Management
SNAX/APC Configuration and Management Manual—138787
E-10
1: ZAPC-EVT-FSM-ERR
ZAPC-TKN-FSM-NAME
identifies the name of the finite state machine (FSM). This enumerated token can
have one of the following literal values:
ZAPC-VAL-FSM-NAME-BIS-BDR
is the finite state machine FSM_BIS_BIDDER, which represents the status of a
bidder half-session.
ZAPC-VAL-FSM-NAME-BIS-FSP
is the finite state machine FSM_BIS_FSP, which represents the status of a first-
speaker half-session.
ZAPC-VAL-FSM-NAME-BSM
is the finite state machine FSM_BSM_FMP19, which enforces the bracket
protocol.
ZAPC-VAL-FSM-NAME-CHAIN-RCV
is the finite state machine FSM_CHAIN_RCV_FMP19, which enforces the
chaining protocol for received chains.
ZAPC-VAL-FSM-NAME-CHAIN-SEND
is the finite state machine FSM_CHAIN_SEND_FMP19, which enforces the
chaining protocol for sending chains.
ZAPC-VAL-FSM-NAME-CONV
is the finite state machine FSM_CONVERSATION, which represents the status
of a conversation.
ZAPC-VAL-FSM-NAME-ERR
is the finite state machine FSM_ERROR_OR_FAILURE, which represents if
any error or failure message unit records have been received by Presentation
Services.
ZAPC-VAL-FSM-NAME-IRQ-MODE-R
is the finite state machine FSM_IMMEDIATE_RQ_MODE_RCV, which
enforces the immediate request mode receive protocol.
ZAPC-VAL-FSM-NAME-IRQ-MODE-S
is the finite state machine FSM_IMMEDIATE_RQ_MODE_SEND, which
enforces the immediate request-mode send protocol.