SNAX/APC Configuration and Management Manual

Event Management

SNAX/APC Configuration and Management Manual—138787

E-28

17: ZAPC-EVT-INV-DEV-TYPE

The device type of an LU is invalid for the underlying access method. Either the LU is

neither a SNAX/XF LU nor a SNAX/CDF APPL object, or the LU is a parallel-session

LU and the access method is not SNAX/APN.

Message Parameter Descriptions

<1> equals ZCOM-TKN-SUBJ-PROC.

<2> equals ZAPC-TKN-LU-NAME.

Unconditional Tokens

ZEMS-TKN-EVENTNUMBER

is the event number. Its value is ZAPC-EVT-INV-DEV-TYPE.

ZEMS-TKN-CONSOLE-PRINT

contains the value ZSPI-VAL-TRUE, which directs that the event message be

processed by the compatibility distributor.

ZEMS-TKN-EMPHASIS

contains the value ZSPI-VAL-FALSE, indicating that the event should not be

considered critical to your operations environment.

ZCOM-TKN-SUBJ-PROC

is the name of the SNAX/APC process for which the event occurred.

ZAPC-TKN-LU-NAME.

identifies the name of the LU.

Cause. An LU device type is invalid.

Effect. The process continues, but this LU cannot be used.

Recovery. Specify a correct SNAX file name for the LU and restart the LU. The LU

device type must be one of the supported access methods, such as a SNAX/XF LU or a

Unconditional Tokens

ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM.

ZEMS-TKN-CONSOLE-PRINT token-type ZSPI-TYP-BOOLEAN.

ZEMS-TKN-EMPHASIS token-type ZSPI-TYP-BOOLEAN.

ZCOM-TKN-SUBJ-PROC token-type ZSPI-TYP-STRING.

ZAPC-TKN-LU-NAME token-type ZSPI-TYP-STRING.

Event-Message Text

<1>: Invalid device type, LU = <2>