SNAX/APC Configuration and Management Manual

Event Management
SNAX/APC Configuration and Management Manual—138787
E-47
31: ZAPC-EVT-NEG-RSP-SENT
ZCMK-TKN-SNAERR
is the first two bytes of sense data. In the message text, argument <2> is shown in
hexadecimal, while argument <4> shows an English language explanation of the
message for this token.
As much of the session name is supplied as is known at the time the response is sent.
For example, if SNAX/APC receives a BIND request, it may reject it before it has
located the partner LU (or because it does not recognize the partner LU). In this
case, the session name in the event comprises only the local LU name of the LU
sending the response.
ZAPC-TKN-SENSE2
is the second two bytes of sense data.
ZAPC-TKN-MUT
is the SNA response RU.
Cause. A negative response has been sent on an SNA session.
Effect. Inspect the sense data to determine the cause of the negative response.
Recovery. Recovery will depend upon the reason for the negative response, as given by
the SNA sense code. Refer to the IBM Systems Network Architecture Formats manual
for further information on SNA sense codes.