SNAX/APC Configuration and Management Manual

Event Management
SNAX/APC Configuration and Management Manual—138787
E-51
33: ZAPC-EVT-SWITCHING-DB
Recovery. You should wait for the event that follows to determine the success or failure
of the switch. One of the following two possible events will follow this event:
ZAPC-EVT-SWITCHING-DB-FAILED or
ZAPC-EVT-SWITCHING-DB-DONE
If the switch fails, an additional event will precede the ZAPC-EVT-SWITCHING-DB-
FAILED event. This event will show the error that caused the switch to fail.