SNAX/APC Configuration and Management Manual

Event Management
SNAX/APC Configuration and Management Manual—138787
E-61
40: ZAPC-EVT-SEC-SERVER-ERR
automatically from the error, SNAX/APC deactivates the session; the UNBIND request
contains the sense code %H084F0002, security component not available.
Recovery. When SNAX/APC recovers automatically, no other recovery action is
required. If SNAX/APC deactivates the session, examine the error number in this event.
If the error number indicates a condition that can be corrected, correct the problem and
try the operation again. If the problem cannot be corrected, get a trace of the problem
and report the problem to Tandem.