SNAX/APC Configuration and Management Manual

Index
SNAX/APC Configuration and Management Manual—138787
Index-2
B
APCRUN (continuation)
TRACEOPTION option 3-18
TRACEPAGES option 3-19
APCTAP 6-4
BIN and BOUT trace records 5-16
commands
COUNT 5-3
DISPLAY 5-3
EXIT 5-3
FC 5-3
FROM 5-3, 5-4
GO 5-5
HEX 5-5
LENGTH 5-6
LOAD 5-6
NEXT 5-7
RANGE 5-7
RECORD 5-8
SELECT 5-9
TO 5-10
TRANSLATE 5-11
using 5-13
DIN and DOUT trace records 5-14/5-15
D-series environment 1-10, 5-1
interpreting output 5-13
introduction 5-1
starting 5-1
trace facility
starting and stopping 5-1
APPC
implementations 2-2
Security 2-9
APPC PC
configuration 2-7
APPL
opener process protocol interface 8-70
SNAX/CDF object 4-13, 8-10, 8-24
Application Prototype Simulator System
See APS
APS
introduced 1-9
support for high PINs 1-9
ASSUME command
All object types, generic 8-38
/8-40
CONV object 8-38
LU object 8-39
PROCESS object 8-39
PTNR-LU object 8-39
PTNR-MODE object 8-39
SESSION object 8-39
TPI object 8-40
TPN object 8-40
ATTACH requests 4-17, 8-20, 8-36, 8-52, 8-
66, 8-68
Acceptance from partner LUs 8-76
Initiator 8-65
Queued 8-7, 8-52, 8-66, 8-67
Rejected 4-17, 8-8, 8-20, 8-36, 8-52, 8-
66, 8-67, 8-77
ATTRIBUTE
APC option 3-13
APCRUN option 3-13
Automatically starting LUs 4-13, 8-11, 8-23
AUTOSTART attribute
ADD LU command 4-13
, 8-11
ALTER LU command 8-23
AutoStart field
INFO LU command 8-46
, 8-47
B
Backup CPU field
INFO PROCESS command 8-48
/8-50
Backup Debug field
INFO PROCESS command 8-49
, 8-51
Backup process ID 8-69
Backup State field
STATUS PROCESS command 8-87
/8-
88