SNAX/APC Configuration and Management Manual

Index
SNAX/APC Configuration and Management Manual—138787
Index-17
S
PTNR-MODE name 8-57
running 3-4, 3-12
Security 2-10
SESSION name 8-61
starting the process 4-2
starting with TACL 3-20
starting with the PATHMON process 3-
19
TPI name 8-64
TPN name 8-66
trace facility
See APCTAP
User library 8-53
using SNAX/CDF with 2-6
SNAX/APN access method 4-12, 8-10
SNAX/CDF
use with SNAX/APC 2-6
SNAX/CDF access method 4-13, 8-10, 8-24
SNAX/CDF APPL object 8-24
SNAX/XF access method 4-13, 8-11, 8-24
SOURCE 8-60
specifies 3-13
SPI 6-3, 8-70
START command
All object types, generic 8-74
/8-77
LU object 8-75
PTNR-LU object 8-75
PTNR-MODE object 8-76
TPN object 8-76
STARTED state 6-6
STARTING state 6-6
Startup, optional PARAMs 3-5/3-12
States
Defined 6-6
Object 6-6
STATS command
All object types, generic 8-77
/8-83
LU object 8-78
PROCESS object 8-79/8-81
PTNR-MODE object 8-81
SESSION object 8-82
STATUS command
All object types, generic 8-83
/8-97
CONV object 8-83/8-85
LU object 8-85/8-86
PROCESS object 8-86/8-88
PTNR-LU object 8-89
PTNR-MODE object 8-90/8-91
SESSION object 8-91/8-96
TPI object 8-96
TPN object 8-96/8-97
STOP attribute
TRACE command 8-102
STOP command
All object types, generic 8-97
/8-101
LU object 8-98
PTNR-LU object 8-98
PTNR-MODE object 8-99/8-100
SESSION object 8-100
TPI object 8-101
TPN object 8-101
STOPPED state 6-6
STOPPING state 6-6
STOP, APCRUN option 3-18
SUB parameter 6-5, 6-6
Subarea nodes 4-29, 8-14, 8-30
Subordinate objects
See SUB parameter
Subsystem Control Facility
See SCF
Subsystem Control Point
See SCP
Subsystem environment, DSM 6-2
Subsystem Programmatic Interface
See SPI
Sum State field
STATUS CONV command 8-84
STATUS LU command 8-85/8-86