SNAX/APC Configuration and Management Manual

Contents
SNAX/APC Configuration and Management Manual—138787
vi
6. Introduction to SCF for SNAX/APC
5. Trace Analysis Program (continued)
RANGE Command 5-7
RECORD Command
5-8
SELECT Command
5-9
TO Command
5-10
TRANSLATE Command
5-11
Using the Trace Analysis Program
5-12
Using APCTAP Commands
5-13
Interpreting TRACE Entries
5-13
An Example Session with APCTAP
5-16
Normal Version (Log Format)
5-17
Error Version (Trace Format)
5-21
Part II. SCF Reference for SNAX/APC
6. Introduction to SCF for SNAX/APC
Tasks You Can Perform Using SCF 6-1
Subsystem Control Facility (SCF) Overview
6-2
Distributed Systems Management (DSM)
6-2
Subsystem Control Point (SCP)
6-3
SCF Commands
6-3
Sensitive and Nonsensitive Commands
6-4
General Command Format
6-4
Objects
6-5
Object States
6-6
How SCF Works
6-7
Input Sources
6-7
Modes of Operation
6-7
Setting the Initial Input Source
6-8
Output Destinations
6-8
Setting the Initial Output Destination
6-8
SCF Online Help
6-8
Environmental Requirements
6-9