SNAX/APC Configuration and Management Manual

Configuring Network Resources for SNAX/APC
SNAX/APC Configuration and Management Manual—138787
4-7
Configuring a Server Mechanism
SNAX/APC subsystem. You must also configure the local LU with
DYNAMICSUPPORT YES, and either single or parallel session support. See
Configuring a Server Mechanism on page 4-7 for further details.
Configuring a Server Mechanism
Dynamic SNAXFILENAME support allows a SNAX/APC process to receive unsolicited
BINDs from unknown partner LUs via the SNAX Creator-2 process. Because the
SNAX/APC subsystem does not initially open the line, the request for service may
originate from any line handler and SNAX/APC merely responds by opening a line to
that handler as a result of the request.
Used together with SNAX/APN, a sophisticated server mechanism can be easily
constructed. Figure 4-2
and the following text supply the details.