SNAX/APC Management Programming Manual

Contents
xiv 111813 Tandem Computers Incorporated
35: ZAPC-ERR-UPPER-OBJ-NOT-FOUND A-40
36: ZAPC-ERR-UPPER-OBJ-NOT-STARTED A-41
37: ZAPC-ERR-TKN-INV-IN-SUMSTATE A-42
38: ZAPC-ERR-CANNOT-SWITCH-TO-SS A-43
39: ZAPC-ERR-CONFIG-IS-BAD A-44
40: ZAPC-ERR-CONFIG-IS-SWITCHING A-45
41: ZAPC-ERR-CONFIG-FILE-NAME A-46
42: ZAPC-ERR-OBJ-IS-STARTING A-47
Appendix B Programming Example
Glossary Glossary–1
Index Index–1
Figures Figure 1-1. Interfaces to SNAX/APC 1-2
Figure 1-2. How SNAX/APC Fits Into the DSM Architecture 1-4
Figure 3-1. Hierarchies Among SNAX/APC Objects 3-3
Tables Table 1-1. Programmatic Command Summary 1-6
Table 3-1. Object Summary States 3-14
Table 4-1. SPI Standard Definitions Used by SNAX/APC 4-2
Table 4-2. EMS Standard Definitions Used by SNAX/APC 4-5
Table 4-3. Data Communications Standard Definitions Used by
SNAX/APC 4-7
Table 4-4. SNAX/APC Tokens 4-16
Table 5-1. SNAX/APC Subsystem Commands 5-2
Table 6-1. Common Event Messages 6-3
Table 6–2. SNAX/APC Event Messages 6-5