SNAX/APC Management Programming Manual

INFO PTNR-MODE
Commands and Responses
111813 Tandem Computers Incorporated 5–57
ZAPC–TKN–AUTO-ACTIVATE-LIM
indicates the number of contention-winner sessions that are activated
automatically after the PTNR-MODE object is in the STARTED state.
ZAPC–TKN–CUR-MAXINRUSIZE
indicates the current maximum size of normal flow request units (RUs) that the
local LU receives on the session.
ZAPC–TKN–CUR-MAXOUTRUSIZE
indicates the current maximum size of normal flow request units (RUs) that the
local LU sends on the session.
ZAPC–TKN–D-MAXINRUSIZE
indicates the maximum size of normal flow request units (RUs) that the local LU
can receive over sessions started with this partner mode.
ZAPC–TKN–D-MAXOUTRUSIZE
indicates the maximum size of normal flow request units (RUs) that the local LU
can send over sessions started with this partner mode.
ZAPC–TKN–D-MIN-CONLOSERS-LIM
indicates the default number of sessions for which the local LU is designated to be
the contention loser.
ZAPC–TKN–D-MIN-CONWINNERS-LIM
indicates the default number of sessions for which the local LU is designated to be
the contention winner.
ZAPC–TKN–DRAIN-SOURCE
indicates whether the local LU will satisfy any pending allocation requests before
terminating a session. This applies only to a single CNOS command, and has
meaning only for as long as that command is being processed (including
draining).
ZAPC–TKN–DRAIN-TARGET
indicates whether the partner LU will satisfy any pending allocation requests
before terminating a session. This applies only to a single CNOS command, and
has meaning only for as long as that command is being processed (including
draining).