SNAX/APC Management Programming Manual

LISTOPENS Command

Commands and Responses

5–70 111813 Tandem Computers Incorporated

Tokens in Response Buffer

ZSPI-TKN-DATALIST

is a standard SPI data list, as described in the SPI Programming Manual. The list

ends with the token ZSPI-TKN-ENDLIST.

ZCMK-MAP-LISTOP

is a standard data communications extensible structured token that identifies an

opener of a process. For this token to be returned in the response, the application

must currently be opened. Refer to the SPI Common Extensions Manual for further

information on this extensible structured token.

ZCMK-TKN-LISTOP-XPNAME

is a standard data communications token that gives the name of the opener. For

this token to be returned in the response, the application must currently be

opened. Refer to the SPI Common Extensions Manual for further information on this

token.

ZCMK-TKN-LISTOP-QUALIFS

is a standard data communications token that records the qualifiers used when

SNAX/APC was opened. For this token to be returned in the response, the

application must currently be opened. Refer to the SPI Common Extensions Manual

for further information on this token.

ZCOM-TKN-OBJNAME

is a standard data communications token that identifies the object name and the

SNAX/APC process name. SNAX/APC object names have the format

snax/apc-process-name

object-name

. This token is always present in the

response buffer. Refer to Section 3, “Elements of SPI Messages for SNAX/APC,”

for further information on object names.

ZCOM-TKN-OBJTYPE

is a standard data communications token that indicates the object type. For

ZCOM-CMD-LISTOPENS, the valid object type is PROC.

ZSPI-TKN-RETCODE

indicates whether the command was successful and, if not, the reason for failure.