SNAX/APC Management Programming Manual

RESETSTATS Command

Commands and Responses

5–74 111813 Tandem Computers Incorporated

Tokens in Response Buffer

ZSPI-TKN-DATALIST

is a standard SPI data list, as described in the SPI Programming Manual. The list

ends with the token ZSPI-TKN-ENDLIST.

ZCOM-TKN-OBJNAME

is a standard data communications token that identifies the object name and the

SNAX/APC process name. SNAX/APC object names have the format

snax/apc-process-name

object-name

. This token is always present in the

response buffer. Refer to Section 3, “Elements of SPI Messages for SNAX/APC,”

for further information on object names.

ZCOM-TKN-OBJTYPE

is a standard data communications token that indicates the object type. For

ZCOM-CMD-RESETSTATS, the valid object types are LU, PROC, PTNR-MODE,

and SESS.

ZSPI-TKN-RETCODE

indicates whether the command was successful and, if not, the reason for failure.

ZSPI-TKN-ERRLIST

is a standard SPI error list, as described in the SPI Programming Manual. The list

ends with the token ZSPI-TKN-ENDLIST.

ZSPI-TKN-CONTEXT

is the standard SPI context token discussed in the SPI Programming Manual.