SNAX/APC Management Programming Manual

STATUS Command
Commands and Responses
5–94 111813 Tandem Computers Incorporated
Tokens in Response Buffer
ZSPI-TKN-DATALIST
is a standard SPI data list, as described in the SPI Programming Manual. The list
ends with the token ZSPI-TKN-ENDLIST.
ZCOM-TKN-OBJNAME
is a standard data communications token that identifies the object name and the
SNAX/APC process name. SNAX/APC object names have the format
$ snax/apc-process-name . object-name . This token is always present in the
response buffer. Refer to Section 3, “Elements of SPI Messages for SNAX/APC,”
for further information on object names.
ZCOM-TKN-OBJTYPE
is a standard data communications token that indicates the object type. For
ZCOM-CMD-STATUS, the valid object types are CONVERSATION, LU, PROC,
PTNR-LU, PTNR-MODE, SESS, TPN, and TPI.
ZCOM-TKN-OBJSTATE
is a standard data communications token that describes the current summary state
of the object. The values that can be present in this token are described in
Section 3, “Elements of SPI Messages for SNAX/APC.”
ZSPI-TKN-RETCODE
indicates whether the command was successful and, if not, the reason for failure.
ZSPI-TKN-ERRLIST
is a standard SPI error list, as described in the SPI Programming Manual. The list
ends with the token ZSPI-TKN-ENDLIST.
ZSPI-TKN-CONTEXT
is the standard SPI context token discussed in the SPI Programming Manual.