SNAX/APC Management Programming Manual

SNAX/APC Events
Event Management
111813 Tandem Computers Incorporated 6–5
SNAX/APC Event Summary SNAX/APC generates event messages for events that involve objects under its control.
Table 6–2 lists a summary of SNAX/APC event messages.
Table 6–2. SNAX/APC Event Messages (Page 1 of 2)
Event Number Symbolic Name (ZAPC–EVT–) Description
1 FSM–ERR An unexpected FSM error.
2 INV–INIT An invalid SNAX/APC startup parameter.
3 INV–CONFIG An invalid configuration file.
4 Retired message
5 Retired message
6 INV–OP An operational failure has been detected.
7 Retired message
8 Retired message
9 Retired message
10 BID–REJECT A request from a remote LU for a conversation
with a local LU was rejected.
11 BKUP-TAKEOVER The process was taken over by the backup CPU.
12 DEALLOCATE–ERR Deallocation of an extended data segment used
for tracing failed.
13 INIT–INFO Indicates initialization information.
14 LU–DEVINFO–ERR A device type inquiry for an LU has failed.
15 LU–CONNECT–ERR A connect for an LU has failed.
16 LU–OPEN–ERR SNAX/APC was unable to open a SNAX/XF or
SNAX/CDF LU.
17 INV–DEV–TYPE The device type of the LU is invalid.
18 Retired message
19 Retired message
20 SNAX–FILE–ERR A file-system error was received from SNAX/XF
or SNAX/CDF.
21 TPREADY–REJECT A TP–READY request was not completed.
22 UNXP–PAC–RQ An unexpected pacing request.
23 UNKNOWN–IPC SNAX/APC received an unknown IPC message
for processing.
24 RCVD–RMT–CNOS–CMD A remote CNOS command has been received.
25 CNOS–CONV–FAIL The CNOS conversation has failed.
26 CNOS–CMD–RACE A CNOS command race has been detected.
27 SESS–LIMIT–CHANGED The session limits of the PTNR–MODE object
were changed by either the local or remote LU.
28 CNOS–CMD–NEGOTIATED The remote CNOS command is in effect, but the
session limits have been negotiated.