SNAX/APC Management Programming Manual

29: ZAPC-EVT-CNOS-CMD-REJECTED
Event Management
111813 Tandem Computers Incorporated 6–47
ZAPC-TKN-REASON
identifies the reason the CNOS command was rejected. This enumerated token
can have one of the following literal values:
ZAPC-VAL-REASON-UNKWN-MODENAME
specifies that the partner mode name is not recognized.
ZAPC-VAL-REASON-ZERO-SESS-LIM
specifies that the session limit is set to 0.
Cause
The remote CNOS command was rejected for the specified reason.
Effect
The remote CNOS command is rejected. A reply is returned with the specified reason.
No session limit is changed.
Recovery
Correct and reissue the CNOS command at the remote LU.