SNAX/APC Management Programming Manual

31: ZAPC-EVT-NEG-RSP-SENT
Event Management
111813 Tandem Computers Incorporated 6–51
ZCMK-TKN-SNAERR
is the first two bytes of sense data. In the message text, argument <2> is shown in
hexadecimal, while argument <4> shows an English language explanation of the
message for this token.
As much of the session name is supplied as is known at the time the response is
sent. For example, if SNAX/APC receives a BIND request, it may reject it before it
has located the partner LU (or because it does not recognize the partner LU). In
this case, the session name in the event comprises only the local LU name of the
LU sending the response.
ZAPC-TKN-SENSE2
is the second two bytes of sense data.
ZAPC-TKN-MUT
is the SNA response RU.
Cause
A negative response has been sent on an SNA session.
Effect
Inspect the sense data to determine the cause of the negative response.
Recovery
Recovery will depend upon the reason for the negative response, as given by the SNA
sense code. Refer to the IBM Systems Network Architecture Formats manual for further
information on SNA sense codes.