SNAX/APC Management Programming Manual

33: ZAPC-EVT-SWITCHING-DB
Event Management
111813 Tandem Computers Incorporated 6–55
Cause
Either an unexpected file error on the original configuration file or a SPI (or SCF)
ALTER PROC command has occurred which initiated a configuration file switch.
Effect
This is an informational event only; the process continues.
Recovery
You should wait for the event that follows to determine the success or failure of the
switch. One of the following two possible events will follow this event:
ZAPC-EVT-SWITCHING-DB-FAILED or
ZAPC-EVT-SWITCHING-DB-DONE
If the switch fails, an additional event will precede the ZAPC-EVT-SWITCHING-DB-
FAILED event. This event will show the error that caused the switch to fail.