SNAX/APC Management Programming Manual

SNAX/APC Errors
Error Numbers and Error Lists
A–4 111813 Tandem Computers Incorporated
SNAX/APC Errors SNAX/APC may return the following SNAX/APC errors:
1: ZAPC–ERR–ACTV–FAIL–NO-RETRY
2: ZAPC-ERR-ACTV-FAIL-RETRY
3: ZAPC-ERR-ALLOC-ERR-NO-RETRY
4: ZAPC-ERR-ALLOC-ERR-RETRY
5: ZAPC-ERR-ALLOC-ERR-PGM-NOT-AVL
6: ZAPC-ERR-CMD-FORCED
7: ZAPC-ERR-CMD-INV-DEFT-OBJ
8: ZAPC-ERR-CMD-INV-NOT-PS-LU
9: ZAPC-ERR-CMD-NEGOTIATED
10: ZAPC-ERR-CMD-RACE-REJECT
11: ZAPC-ERR-CONFIG-IN-PROGRESS
12: ZAPC-ERR-DEFT-OBJNAME
13: ZAPC-ERR-DRAIN-S-NO-IN-EFFECT
14: ZAPC-ERR-DUP-MODENAME
15: ZAPC-ERR-INV-DEV-TYPE
16: ZAPC-ERR-LU-SESS-LIM-XCEEDED
17: ZAPC-ERR-MODENAME-UNRECOGNIZED
18: ZAPC-ERR-OBJ-CANNOT-DEL
19: ZAPC-ERR-OTH-MODES-NOT-STOPPED
20: ZAPC-ERR-PARAM-ERR
21: ZAPC-ERR-REQ-XCEEDS-MAX-LIM
22: ZAPC-ERR-RES-FAIL-NO-RETRY
23: ZAPC-ERR-SESS-LIM-CLOSED
24: ZAPC-ERR-SESS-LIM-NOT-ZERO
25: ZAPC-ERR-SESS-LIM-ZERO
26: ZAPC-ERR-SNASVCMG-NOT-STARTED
27: ZAPC-ERR-SNASVCMG-PARAM-ERR
28: ZAPC-ERR-SUB-NOT-DELETED
29: ZAPC-ERR-SUB-NOT-STOPPED
30: ZAPC-ERR-TOO-MANY-SUB-OBJ
31: ZAPC-ERR-TRACE-ALREADY-ACTIVE
32: ZAPC-ERR-TRACE-NOT-STOPPED
33: ZAPC-ERR-TRACE-NOT-TRACING
34: ZAPC-ERR-TRACE-SHUTDOWN-ERROR
35: ZAPC-ERR-UPPER-OBJ-NOT-FOUND
36: ZAPC-ERR-UPPER-OBJ-NOT-STARTED
37: ZAPC-ERR-TKN-INV-IN-SUMSTATE
38: ZAPC-ERR-CANNOT-SWITCH-TO-SS
39: ZAPC-ERR-CONFIG-IS-BAD
40: ZAPC-ERR-CONFIG-IS-SWITCHING
41: ZAPC-ERR-TKN-CONFIG-FILE-NAME
42: ZAPC-ERR-OBJ-IS-STARTING
The descriptions on the following pages are given in ascending order by error number;
that is, in ascending order by the ZAPC-ERR- values.