SNAX/APC Management Programming Manual

8: ZAPC-ERR-CMD-INV-NOT-PS-LU
Error Numbers and Error Lists
A–12 111813 Tandem Computers Incorporated
8: ZAPC-ERR-CMD-INV-NOT-PS-LU
This command cannot act upon a single-session LU while that LU is in the STARTED
state.
ZSPI–TKN–ERRLIST token–type ZSPI–TYP–LIST.
ZSPI–TKN–ERROR token–type ZSPI–TYP–ERROR.
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-STRING
ZSPI–TKN–ENDLIST token–type ZSPI–TYP–SSCTL.
ZSPI–TKN–ERROR
is the standard SPI error token, as described in the SPI Programming Manual. Its
value consists of the subsystem ID and the error number found in the ZAPC–ERR–
CMD–INV–NOT–PS-LU token. ZSPI–TKN–ERROR is always present in the error
list.
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list, and is described in Section 4,
“Common Definitions.”
ZCOM-TKN-OBJTYPE
is the object type provided with the command on which the error occurred. This
token is always present in the error list, and is described in Section 4, “Common
Definitions.”
Cause
An ALTER PTNR-MODE command was issued for a single-session LU while that LU
was in the STARTED state.
Effect
The ALTER PTNR-MODE command fails.
Recovery
Do not use the ALTER PTNR-MODE command for single-session LUs.