SNAX/APC Management Programming Manual

23: ZAPC-ERR-SESS-LIM-CLOSED
Error Numbers and Error Lists
A–28 111813 Tandem Computers Incorporated
23: ZAPC-ERR-SESS-LIM-CLOSED
The session limit cannot be raised above 0.
ZSPI–TKN–ERRLIST token–type ZSPI–TYP–LIST.
ZSPI–TKN–ERROR token–type ZSPI–TYP–ERROR.
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-STRING
ZSPI–TKN–ENDLIST token–type ZSPI–TYP–SSCTL.
ZSPI–TKN–ERROR
is the standard SPI error token, as described in the SPI Programming Manual. Its
value consists of the subsystem ID and the error number found in the ZAPC–ERR–
SESS–LIM–CLOSED token. ZSPI–TKN–ERROR is always present in the error list.
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list, and is described in Section 4,
“Common Definitions.”
ZCOM-TKN-OBJTYPE
is the object type provided with the command on which the error occurred. This
token is always present in the error list, and is described in Section 4, “Common
Definitions.”
Cause
The command failed because the specified LU currently will not allow the session limit
for the associated mode name to be raised above 0.
The equivalent RETURN_CODE value defined in the IBM Transaction Programmer's
Reference Manual for LU 6.2 is LU_MODE_SESSION_LIMIT_CLOSED.
Effect
The session limit cannot be raised above 0.
Recovery
Informative message only; no action is required.