SNAX/APC Management Programming Manual

33: ZAPC-ERR-TRACE-NOT-TRACING
Error Numbers and Error Lists
A–38 111813 Tandem Computers Incorporated
33: ZAPC-ERR-TRACE-NOT-TRACING
Tracing has not been started.
ZSPI–TKN–ERRLIST token–type ZSPI–TYP–LIST.
ZSPI–TKN–ERROR token–type ZSPI–TYP–ERROR.
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-STRING
ZSPI–TKN–ENDLIST token–type ZSPI–TYP–SSCTL.
ZSPI–TKN–ERROR
is the standard SPI error token, as described in the SPI Programming Manual. Its
value consists of the subsystem ID and the error number found in the ZAPC–ERR–
TRACE–NOT–TRACING token. ZSPI–TKN–ERROR is always present in the error
list.
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list, and is described in Section 4,
“Common Definitions.”
ZCOM-TKN-OBJTYPE
is the object type provided with the command on which the error occurred. This
token is always present in the error list, and is described in Section 4, “Common
Definitions.”
Cause
Trace is already in the INACTIVE state when the TRACE, STOP command is issued.
Effect
The TRACE, STOP command is rejected.
Recovery
Informative message only; no action is required.