SNAX/APC Management Programming Manual

34: ZAPC-ERR-TRACE-SHUTDOWN-ERROR
Error Numbers and Error Lists
111813 Tandem Computers Incorporated A–39
34: ZAPC-ERR-TRACE-SHUTDOWN-ERROR
Tracing shutdown error.
ZSPI–TKN–ERRLIST token–type ZSPI–TYP–LIST.
ZSPI–TKN–ERROR token–type ZSPI–TYP–ERROR.
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-STRING
ZSPI–TKN–ENDLIST token–type ZSPI–TYP–SSCTL.
ZSPI–TKN–ERROR
is the standard SPI error token, as described in the SPI Programming Manual. Its
value consists of the subsystem ID and the error number found in the ZAPC–ERR–
TRACE–SHUTDOWN–ERROR token. ZSPI–TKN–ERROR is always present in
the error list.
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list, and is described in Section 4,
“Common Definitions.”
ZCOM-TKN-OBJTYPE
is the object type provided with the command on which the error occurred. This
token is always present in the error list, and is described in Section 4, “Common
Definitions.”
Cause
A deallocate-segment error causes the TRACE, STOP command to be rejected.
Effect
The TRACE, STOP command fails.
Recovery
You need to seek additional help. Follow the procedures described at the beginning of
this appendix for collecting relevant information and contacting the appropriate
support personnel.