SNAX/APC Management Programming Manual

40: ZAPC-ERR-CONFIG-IS-SWITCHING
Error Numbers and Error Lists
111813 Tandem Computers Incorporated A–45
40: ZAPC-ERR-CONFIG-IS-SWITCHING
The configuration file is currently switching.
ZSPI–TKN–ERRLIST token–type ZSPI–TYP–LIST.
ZSPI–TKN–ERROR token–type ZSPI–TYP–ERROR.
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-STRING
ZSPI–TKN–ENDLIST token–type ZSPI–TYP–SSCTL.
ZSPI–TKN–ERROR
is the standard SPI error token, as described in the SPI Programming Manual. Its
value consists of the subsystem ID and the error number found in the ZAPC–ERR–
CONFIG-IS-SWITCHING literal. ZSPI–TKN–ERROR is always present in the
error list.
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list, and is described in Section 4,
“Common Definitions.”
ZCOM-TKN-OBJTYPE
is the object type provided with the command on which the error occurred. This
token is always present in the error list, and is described in Section 4, “Common
Definitions.”
Cause
Configuration file switching is in progress.
Effect
This is an informational message.
Recovery
Retry the command after the configuration switching is completed.