SNAX/APC Management Programming Manual

41: ZAPC-ERR-CONFIG-FILE-NAME
Error Numbers and Error Lists
A–46 111813 Tandem Computers Incorporated
41: ZAPC-ERR-CONFIG-FILE-NAME
An invalid configuration file name was entered.
ZSPI–TKN–ERRLIST token–type ZSPI–TYP–LIST.
ZSPI–TKN–ERROR token–type ZSPI–TYP–ERROR.
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-STRING
ZSPI–TKN–ENDLIST token–type ZSPI–TYP–SSCTL.
ZSPI–TKN–ERROR
is the standard SPI error token, as described in the SPI Programming Manual. Its
value consists of the subsystem ID and the error number found in the ZAPC–ERR–
CONFIG-FILE-NAME literal. ZSPI–TKN–ERROR is always present in the error
list.
ZCOM-TKN-OBJNAME
is the first object name provided with the command on which the error occurred.
This token is always present in the error list, and is described in Section 4,
“Common Definitions.”
ZCOM-TKN-OBJTYPE
is the object type provided with the command on which the error occurred. This
token is always present in the error list, and is described in Section 4, “Common
Definitions.”
Cause
An invalid configuration file name was specified. The configuration file name must be
local to the SNAX/APC process.
Effect
The command does not complete.
Recovery
Retry the command with a valid file name.