SNAX/APN Application Programming Manual

Index
SNAX/APN Application Programming Manual—420111-001
Index-8
T
SNALU (SNAX application logical
unit) (continued)
communicating between LUs 4-17
DEVICEINFO procedure 4-9
EFI (Expedited Flow Indicator) 4-4
FILEINFO procedure 4-9
initiating LU-LU sessions 4-11
LUNS indicator 4-4
negative response formats 4-13
OPEN procedure 4-9
opening an LU 4-11
pacing 4-21
positive response formats 4-13
PU type 1 4-10
PU type 2 4-10
QRI (Queue Request Indicator) 4-4
request/response header 4-5
request/response mode 4-19
send/receive modes 4-20
sequence numbers 4-5
status codes 4-5
TC (transmission control)
indicators 4-4
WRITEREAD call 4-5
TERMOTHER request A-4
SNAX application logical unit
See SNALU (SNAX application logical
unit)
SNAX header 4-2
buffer space 4-8
byte count returned 4-8
QRI 4-7
SNAX/APN logon manager
See TLOGMGR (SNAX/APN logon
manager)
SNAX/CDF features not supported in
SNAX/APN A-4
SNAX/XF features not supported in
SNAX/APN A-3
Special CDI mode 2-7
Special WRITEREAD mode
See special CDI mode
SPI (Subsystem Programmatic Interface),
SNAX/APN configuration 1-5
Status codes and SNALU interface 4-5
Subsystem Control Facility
See SCF (Subsystem Control Facility)
Subsystem Programmatic Interface
See SPI (Subsystem Programmatic
Interface)
T
TACL 3-1
Tandem Advanced Command Language
(TACL) 3-1
Tandem PLU Accept
SNAX/APN High Level API
Configuration 1-7
Tandem PLU Acquire
SNAX/APN High Level API
Configuration 1-6
TC (transmission control) indicators 4-4
TCP
See terminal control process (TCP)
Terminal access mode
after pressing BREAK
CRT interface 2-10
ITI protocol 3-7
setting
CRT interface 2-12
ITI protocol 3-7
Terminal access mode, setting 2-10
CRT interface 3-5
ITI protocol 3-5
Terminal control process (TCP) 2-1
Terminating LU-LU sessions 4-11, 4-21
PLU-initiated 4-21
response formats 4-22
SLU-initiated 4-24
UNBIND request 4-22