SNAX/APN Application Programming Manual

Contents
SNAX/APN Application Programming Manual—420111-001
vi
Tables
Tables
Table 1-1. Device Types and Subtypes Returned by the
FILE_GETINFOBYNAME_ Procedure Call 1-5
Table 2-1.
Differences Between Normal, Special, and Enhanced CDI Modes 2-8
Table 3-1.
Simulated BREAK Keys in 3270-Type Terminals 3-5
Table 4-1.
SNAX Header 4-3
Table 4-2.
Positive Response to BIND Request 4-13
Table 4-3.
Negative Response to BIND Request (page 1 of 2) 4-13
Table 4-4.
BCI and ECI Bit Settings 4-19
Table 4-5.
Format of an UNBIND Request 4-22
Table 4-6.
Positive Response to UNBIND Request 4-23
Table 4-7.
Negative Response to UNBIND Request 4-23
Table A-1.
High-Level Protocol Functions Supported in SNAX/XF but Not
SNAX/APN A-3
Table A-2.
High-Level Protocol Functions Supported in SNAX/CDF but Not
SNAX/APN A-4
Table B-1.
File-System Error Codes (page 1 of 4) B-2
Table B-2.
Responses to a Line or PU Failure B-6
Table B-3.
Data Integrity Errors B-8
Table B-4.
SNA Environment Errors B-8
Table B-5.
SNA Logical Errors B-8
Table B-6.
RU Sense Codes Error Categories B-9
Table B-7.
SNALU Path Errors B-10
Table C-1.
SCF Configuration For PLU Acquire Mode C-2
Table C-2.
SCF Configuration For PLU Accept Mode C-5
Table C-3.
SCF Configuration For SLU Acquire Mode C-9
Table C-4.
SCF Configuration For SLU Accept Mode C-10