SNAX/APN Application Programming Manual

Handling Errors in SNAX/APN Applications
SNAX/APN Application Programming Manual—420111-001
B-5
File-System Error Codes
181 (%265) ITI PRT CRT SNALU SNA device error A status/sense code of %H0801,
%H0807, %H080A, %H081C,
%H082A, %H082F, %H0831, or
%H084A was received from an
SNA device. See IBM SNA
Network Product Formats for
detailed information.
182 (%266) ITI PRT CRT SNALU SNAX/APN
Internal error
A status/sense code not shown in
error 181 was received from an
SNA device.
183 (%267) ITI PRT CRT SNALU LU-LU session end The LU-LU session has ended.
191 (%277) Device power on
200 (%310) ITI PRT CRT SNALU Ownership error This PID is not primary and can
not complete the request.
201 (%311) ITI PRT CRT SNALU Path down Interprocess communication over
this path has failed because the
path is down.
210 (%322) ITI PRT CRT SNALU Ownership aborted The primary process has aborted
ownership and is now the backup.
230 (%346) CPU power on A CPU has been powered on
during the operation. All
outstanding requests are
completed for active LU-LU
sessions.
231 (%347) ITI PRT CRT SNALU Controller power
on
An I/O controller has been
powered on during the operation.
All outstanding requests are
completed for active LU-LU
sessions.
248 (%370) Network line
handler error,
operation aborted
A line handler process failed
while the request was outstanding.
Retry the request, selecting an
alternate path if one exists.
590 (%1116) Invalid parameter
value
951 (%1667) Error encountered
while in Exception
Response mode.
Table B-1. File-System Error Codes (page 4 of 4)
Error Number Type Meaning Possible Cause/Solution