SNAX/HLS Application Programming Manual

ALLOCATE Verb
Application Prototyping and Simulation (APS) System
104707 Tandem Computers Incorporated 6–11
Figure 6-4 presents a sample HLS-ALLOCATE request.
To execute this verb in an APS session, display the request screen by pressing shifted
F2; enter the LU-NAME, PROFILE, PIPELINE-LU-IND, and COMPLETION-MODE
parameters, and press the SEND function key (F12) to cause SNAX/HLS to allocate
the LU.
Figure 6-4. HLS-ALLOCATE Screen
T9089C00 SNAX/HLS Application Prototype Simulator (APS) 15 Jul 91 a20
Request: hls_allocate Session ID: 3 Completion Mode: i
LU Name: $hls #sna2 p1l1
^ ^ ^
Profile Name: paccept Pipeline LU Ind: n
Reply: hls_allocate
Return code: 0
System error: 0
User error: 0
Retry Action: 0 not_applicable
Request complete
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16
OS PC CS RC RD ST SD SS SR GA SA Send Prnt Hex RSet Exit
User Aloc Open Clos Deal Resp Flow RCWT Rcov Exit
HLS-ALLOCATE Request Screen Description
SESSION-ID
Is the session ID of the current APS session. This field is assigned automatically by
APS and is not modifiable by the APS user.
Completion Mode
Specifies how the verb is to be completed. In this field you must place the letter I.
The letter I selects the immediate completion mode. This directs SNAX/HLS to
perform the requested operation but not to involve the Tandem SNA access
method (for example, SNAX/XF) in any way.