SNAX/HLS Application Programming Manual

CLOSE Verb
Application Prototyping and Simulation (APS) System
6–14 104707 Tandem Computers Incorporated
Figure 6-5 presents a sample HLS-CLOSE request.
Figure 6-5. HLS-CLOSE Screen
T9089C00 SNAX/HLS Application Prototype Simulator (APS) 15 Jul 91 a20
Request: hls_close Session ID: 1 Completion Mode: w
Close Reason: 1 Sense Data: (hex)
Reply: hls_close
Return code: 0
System error: 0
User error: 0
Retry Action: 0 not_applicable
Request complete
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16
OS PC CS RC RD ST SD SS SR GA SA Send Prnt Hex RSet Exit
User Aloc Open Clos Deal Resp Flow RCWT Rcov Exit
HLS-CLOSE Request Screen Description
SESSION-ID
Is the session ID of the current APS session. This field is assigned automatically by
APS and is not modifiable by the APS user.
Completion Mode
Specifies how the verb is to be completed. In this field you must type either Q
or W.
The letter Q selects the queued completion mode. This directs SNAX/HLS to
complete your verb immediately with a special completion code RC-
FORTHCOMING. However, the activities or actions you have requested
continue. When they are completed, a queued completion notice is enqueued
to your receive queue. You can sense them with RECEIVE-CONTROL, or wait
for them with RECEIVE-DATA or RECEIVE–CONTROL–WAIT.
The letter W selects the waited completion mode. This directs SNAX/HLS to
complete the actions prior to completing your verb.