SNAX/HLS Application Programming Manual

OPEN Verb
Application Prototyping and Simulation (APS) System
6–28 104707 Tandem Computers Incorporated
Figure 6-11 presents a sample HLS-OPEN request.
Figure 6-11. HLS-OPEN Screen
T9089C00 SNAX/HLS Application Prototype Simulator (APS) 15 Jul 91 a20
Request: hls_open Session ID: 2 Completion Mode: w
Application Name: example Vfy? SendNo: RcvNo:
N 0 0
1234567890123456789012345678901234567890
User data: abc/def
Length: 7
Reply: hls_open
Return code: 0
System error: 0
User error: 0
Retry Action: 0 not_applicable
Send sequence no: 0
Rcv sequence no: 0
Application Name: PRIM
Request complete
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16
OS PC CS RC RD ST SD SS SR GA SA Send Prnt Hex RSet Exit
User Aloc Open Clos Deal Resp Flow RCWT Rcov Exit
To execute this verb in an APS session, display the request screen by pressing shifted
F3, enter APPLICATION-NAME, and verification parameters, and press the SEND
function key (F12) to cause SNAX/HLS to open the session.
HLS-OPEN Request Screen Description
SESSION-ID
Is the session ID of the current APS session. This field is assigned automatically by
APS and is not modifiable by the APS user.
Completion Mode
Specifies how the verb is to be completed. In this field you must place I, Q, or W.
I selects the immediate completion mode. This directs SNAX/HLS to
perform the requested operation but not to involve SNAX in any way.
Successful completion of this form of the HLS-OPEN request indicates that the
session was already open.