SNAX/HLS Application Programming Manual
OPENSESSION
Application Prototyping and Simulation (APS) System
104707 Tandem Computers Incorporated 6–33
If the access method is SNAX/XF, then qualifiers are:
#SNAX/XF–line–name.LU–name
If the access method is SNAX/CDF, the qualifiers are:
#CDF–process–name.openname–of–SNAX/CDF–appl
Profile
Specifies the name of a valid PROFILE record in the current RDT. The name is
converted to uppercase by the SNAX/HLS server.
Appl
Specifies the name of the application. This field, if non-blank, is used as the PLU
name field of a BIND sent by a primary LU or of the DLU name of an INIT-SELF
sent by a secondary LU. If the field is entirely blank, the name is extracted from
the RDT or from the CINIT-message.
Pipeline
Enter Y if the session is to be a pipeline session. Enter N if the session is to be a
nonpipeline session. The value of this field must agree with the
PIPELINE-LU-IND of the PROFILE record, or the SNAX/HLS server returns a
RC-SYNTAX-ERROR.
Verify Seq
Enter Y if the SNAX/HLS server is to perform SNA level sequence number
verification. Enter N if the SNAX/HLS server is not to verify sequence
information. The session BIND must contain TS profile 4 for this field to be set
to Y. If sequence-number verification is to be done, the following two fields must
be entered.
Send Seq
Enter the value of the EOM recovery tag for the last valid message sent to the
session partner. See the subsection on the SEND-DATA verb for a discussion of
recovery tags.
Rcv Seq
Enter the value of the EOM recovery tag for the last valid message received from
the session partner.
OPEN-SESSION Reply Screen Description
Return Code
Displays the value of the verb reply RETURN-CODE in decimal followed by text.