SNAX/HLS Application Programming Manual
RESPONDVerb
Application Prototyping and Simulation (APS) System
6–50 104707 Tandem Computers Incorporated
Resp: HLS-RESPOND
Verb (SF6)
The HLS-RESPOND request directs SNAX/HLS to send a response to a partner-data
message previously sent to you. The request is valid only if the PROFILE attribute
USER-RESPONSES is set You can respond to requests
only
if the RECEIVE-DATA
operation completed with the DRI indicator bearing a value other than 0. The
particular message whose response you are issuing is identified by the MESSAGE-
TAG value, most likely by using the EOM value.
Figure 6-16 shows a sample screen.
Figure 6-16. HLS-RESPOND Screen
T9089C00 SNAX/HLS Application Prototype Simulator (APS) 15 Jul 91 a20
Request: hls_respond Session ID: 1 Completion Mode: w
Response Message Sense Data
Type Tag (hex)
n 1
Reply: hls_respond
Return code: 0
System error: 0
User error: 0
Retry Action: 0 not_applicable
Request complete
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16
OS PC CS RC RD ST SD SS SR GA SA Send Prnt Hex RSet Exit
User Aloc Open Clos Deal Resp Flow RCWT Rcov Exit
HLS-RESPOND Request Screen Description
SESSION-ID
Is the session ID of the current APS session. This field is assigned automatically by
APS and is not modifiable by the APS user.
Response Type
Enter the letter P to issue a positive response, or the letter N to issue a negative
response.