SNAX/HLS Application Programming Manual
SENDSTATUS Verb
Application Prototyping and Simulation (APS) System
104707 Tandem Computers Incorporated 6–59
SS: SEND-STATUS
Verb (F8)
The SEND-STATUS request causes SNAX/HLS to send the SNA LUSTAT message.
LUSTAT allows two session partners to exchange status. Some LUSTATs are reserved
by SNA and others are available for use by any session partner. See the SNA
references listed in “About This Manual” for more information on SNA status
messages. Figure 6-19 shows a sample screen.
Figure 6-19. SEND-STATUS Request Screen
T9089C00 SNAX/HLS Application Prototype Simulator (APS) 15 Jul 91 a20
Request: send_status Session ID: 2
System Error (hex): 0001
User Error (hex): 0002
Reply: send_status
Return code: 0
System error: 0
User error: 0
Retry Action: 0 not_applicable
Request complete
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16
OS PC CS RC RD ST SD SS SR GA SA Send Prnt Hex RSet Exit
User Aloc Open Clos Deal Resp Flow RCWT Rcov Exit
SEND-STATUS Request Screen Description
SESSION-ID
Is the session ID of the current APS session. This field is assigned automatically by
APS and is not modifiable by the APS user.
System Error
Enter the first two bytes of the status in hexadecimal.
User Error
Enter the second two bytes of the status in hexadecimal.