SNAX/HLS Application Programming Manual
CALLUSER Verb
Application Prototyping and Simulation (APS) System
6–64 104707 Tandem Computers Incorporated
Figure 6-21 presents a sample HLS-CALL-USER request.
Figure 6-21. HLS-CALL-USER Request Screen
T9089C00 SNAX/HLS Application Prototype Simulator (APS) 15 Jul 91 a20
Request: hls_call_user Session ID: 2 Completion Mode: i
Argument (hex): abcd dead
1234567890123456789012345678901234567890
User Data: Preset Tables
Length: 13
Reply: hls_call_user
Return code: 0
System error: 0
User error: 0
Retry Action: 0 not_applicable
Argument (hex): ABCD DEAD
User Data:
Length: 0
Request complete
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16
OS PC CS RC RD ST SD SS SR GA SA Send Prnt Hex RSet Exit
User Aloc Open Clos Deal Resp FFlow RCWT Rcov Exit
HLS-CALL-USER Request Screen Description
SESSION-ID
Is the session ID of the current APS session. This field is assigned automatically by
APS and is not modifiable by the APS user.
Completion Mode
Specifies how the verb is to be completed. Only the letter W is acceptable here.
The letter W selects the waited completion mode. This directs SNAX/HLS to
complete the actions prior to completing your verb.
Arguments
Holds two 16-bit values, expressed on this screen in hexadecimal. Their meaning
is controlled by the installation customization routines.
User Data
Contains text that is made available to the customization routines.