SNAX/HLS Application Programming Manual

Data Structures

Customization

7–12 104707 Tandem Computers Incorporated

In cases where SNAX/HLS is does provide the above information, the field contains a

unique five-word identification of the issuing process. Installations must not attempt

to decipher this field in such cases and should instead use the fields described below if

similar information is required. Configurations under which the above is true are the

following:

The SNAX/HLS server is running on a D-Series NonStop System, and the

SNAX/HLS application is running at a high PIN on the same or another D-series

NonStop system.

The SNAX/HLS server is running on a D-series NonStop system, and the

SNAX/HLS application is running on another D-series NonStop system with a

five-character process name (excluding $).

Cpu

is the primary CPU number of the issuing process.

is the primary PIN of the issuing process.

NodeNumber

is the node number of the issuing process.

NodeName

contains the name of the issuing process node.

NodeName^Length

is the length of the node name in the NodeName field. It has a value 0 if the

issuing process has no node name.

ProcessName

contains the name of the issuing process.

ProcessName^Length

is the length of the process name in the ProcessName field. It has a value 0 if the

issuing process is unnamed.