SNAX/HLS Configuration and Control Manual

Command Dictionary
Using the HLSRDT Utility
4–24 104705 Tandem Computers Incorporated
SHOW Command The SHOW command displays the current values maintained in the working image
for an object or a specific attribute of an object.
SHOW { PROFILE } [ attribute ]
{ INIT }
{ BIND }
In the case of showing BIND attributes, some attribute value may be overridden or
outlawed by specific FM and TS values. These are SNA rules. For example, in FM
Profile 2, only single-RU chains are allowed; the setting of the PRI-MULTI-RU and
SEC-MULTI-RU attributes are therefore ignored.
The display produced by the SHOW command indicates this potential problem by
flagging the questionable field with an asterisk (*) to the left of the value. In
determining which of two conflicting pieces of data are in conflict, the program
assumes that the FM and TS Profile numbers are correct. If warning (*) is produced, a
short explanatory note appears on the bottom of the listing.
Examples
The following SHOW PROFILE command produces a formatted listing of the values
currently defined in the PROFILE working image.
@SHOW PROFILE
PROFILE:
hs_polarity: SECONDARY open_mode: ACQUIRE
bind_name: init_name: PROG1
response_type: 1 pipeline_lu_ind: NO
translate: YES lmo: YES
want_sscp_text: NO want_bind_data: NONE
want_flow_control: NO user_responses: NO
max_requests: 2 encode_eri: NO
single_fmh: NO omit_modem_wait: NO
Charmap: FRENCH
bid_rejection: NO_RTR accept_bind: NO
force_rts NO
The following SHOW PROFILE command displays the current setting of the INIT-
NAME attribute:
@SHOW PROFILE INIT_NAME
PROFILE:
init_name: PROG1
@
The following SHOW BIND command produces a formatted listing of the values
currently defined in the BIND working image.