SNAX/HLS Configuration and Control Manual

Objects and Attributes
Using the HLSRDT Utility
104705 Tandem Computers Incorporated 4-39
FM-HEADER-USE
This BIND attribute has the value type yesno . The default value is NO.
FM-HEADER-USE specifies whether formatted headers will be used in this session.
FM-PROFILE
This BIND attribute has the possible values 2, 3, 4, 7, or 18. The default value is 4.
FM-PROFILE specifies the function management profile number.
HDX-FF-RESET-SENDER
This BIND attribute has the possible keywords PRIMARY or SECONDARY. The default
value is SECONDARY.
HDX-FF-RESET-SENDER specifies which partner has the right to send after a reset.
This option is meaningful only for HDX-FF sessions that either do not use brackets, or
for sessions whose reset state is INB.
LU-SESSION-TYPE
This BIND attribute has the value type integer , and its range is from 0 through 255.
The default value is 0.
LU-SESSION-TYPE specifies the LU session type. This value is not decoded by
SNAX/HLS but it is important for the protocol. SNAX/HLS places no restrictions on
the value in this field.
Limitations imposed or implied by LU-SESSION-TYPE codes are outside the scope of
SNAX/HLS.
NO-SEGMENTS
This BIND attribute has the value type yesno . The default value is NO.
NO-SEGMENTS specifies that no segmented RUs will be used. This is a Transmission
Protocol option and is most frequently specified as NO. This field is not currently
interpreted by SNAX/HLS.
PLU-NAME
This BIND attribute has the value type name-8 . The default value is blanks.
PLU-NAME specifies the name of the application issuing the BIND command. This
name is made available to the secondary. This name can be overridden by the
application name on the OPEN-SESSION or HLS-OPEN verbs.