SNAX/HLS Configuration and Control Manual

Command Dictionary
Using the HLSCOM Utility
104705 Tandem Computers Incorporated 6–35
PEEK Command The PEEK command displays internal configuration and resource utilization
information for a given SNAX/HLS process. The display includes the following major
sections:
SNAX/HLS Identification Section. This section identifies the particular version of
SNAX/HLS.
Resource Definition Table Section. This section identifies the RDT database
currently being used.
Configuration Section. This section displays information about the startup
parameters and various operating states.
CharacterSet Section. This section, if present, displays information regarding the
current default character map file and table for the SNAX/HLS process.
Tracing Section. This section, if present, displays the status of tracing.
Statistics Section. This section reveals the configured limit, current value, and
maximum values of various internal conditions.
Storage Utilization. This section shows the storage pool utilization.
PEEK [, DETAIL]
DETAIL
If this phrase is appended, a list of all the available character maps in the current
character mapping file is included in the CharacterSet section of the output. The
characterset section is only displayed if the current default map is other than the
standard ASCII-to-EBCDIC translation.
Examples
A PEEK command to a sample SNAX/HLS process with four active sessions is shown
in Figure 6-5.