SNAX/HLS Configuration and Control Manual

Command Dictionary
Using the HLSCOM Utility
104705 Tandem Computers Incorporated 6–47
not_in_use
The FSM is not initialized or is not used in this session.
reset
The FSM is reset and the session is not active.
p_active
A BIND RU has been sent or received by the SNAX/HLS server. The session
is pending activation.
active
A BIND response has been sent or received by the SNAX/HLS server. The
session is active.
p_reset
An UNBIND RU has been sent or received by the SNAX/HLS server. The
response to UNBIND drives the session state to reset.
Data Traf
Displays the state of the data traffic FSM and can contain:
not_in_use
The FSM is not initialized or is not used in this session.
reset
The FSM is reset and data traffic is not active.
p_active
An SDT RU has been sent or received by the SNAX/HLS server. Data traffic is
pending activation.
active
An SDT response has been sent or received by the SNAX/HLS server. Data
traffic is now active.
p_reset
A CLEAR RU has been sent or received by the SNAX/HLS server. The
response to CLEAR drives data traffic state to reset.
Shutdown
Displays the state of the shutdown FSM. A shutdown sequence is an orderly
termination of a session. If this field is not reset, the session is about to be taken
down. The field can contain: