SNAX/HLS Configuration and Control Manual

Command Dictionary
Using the HLSCOM Utility
6–50 104705 Tandem Computers Incorporated
erp_send
A negative response from the session partner has been sent or received. Error
recovery processing (ERP) is in progress. The session is in SEND state, and no
messages from the session partner can be received.
erp_recv
A negative response from the session partner has been sent or received. Error
recovery processing (ERP) is in progress. The session is in RECEIVE state, and
no messages to the session partner can be sent.
RTR_State
Displays the state of the RTR FSM (used only when brackets are in use). This FSM
enforces the RTR protocol implied after a bracket initiation was rejected with a
sense code of %H0814 (bracket bid reject—RTR forthcoming).
not_in_use
The FSM is not initialized or is not used in this session.
reset
No RTR has been promised or a previously promised RTR has been issued or
received.
pend
The first speaker has rejected a bracket with sense code %H0814, thus
promising an RTR.
STSN_State
Enforces the set and test sequence number (STSN) protocol. This protocol is used
only with TS Profile 4.
not_in_use
The FSM is not initialized or is not used in this session.
reset
There is no outstanding STSN.
pend
There is an outstanding STSN.