SNAX/HLS Configuration and Control Manual

Command Dictionary

Using the HLSCOM Utility

104705 Tandem Computers Incorporated 6–51

Cbsm_Rsp_R

Shows the state of the bracket state manager response received FSM. Despite

the “Received” label, it belongs to the send portion of the session. It is

employed to pass responses to the bracket state manager (see Bracket above)

when a response is being received by the current chain, and the Chain_Recv

FSM is in the BETC condition. The following values are displayed in this field:

not_in_use

The FSM is not initialized or is not used in this session.

reset

No user message (SNA chain) is being sent, or a response to the current

message is being passed to the bracket state manager.

inc

A user message (SNA chain) is being sent.

neg_seen

A negative response to the current chain is being processed and the bracket

state manager is being called with the negative response as input.

Cbsm_Rsp_S

Shows the state of the bracket state manager response sent FSM. Despite the

“Sent” label, it belongs to the receive portion of the session. It is employed to pass

responses to the bracket state manager (see Bracket above) when a response is

being sent to the current chain, and the Chain_Send FSM is in the BETC condition.

The following values are displayed in this field: